- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 24 Apr 2017
Precast concrete cladding
Precast concrete cladding is formed by off-site manufactured precast concrete panels, which can be used to clad a wide range of buildings, such as commercial buildings, residential, retail, leisure, hospitals, schools, and so on.
Precast concrete is a form of concrete that is prepared, cast and cured off-site, usually in a controlled factory environment, using reusable moulds. Precast concrete elements can be joined to other elements on site to form a complete cladding structure.
The production of precast concrete elements takes place under controlled conditions in factories, and so tolerances can be accurately controlled, waste can be minimised, and that a denser, stronger and better-quality concrete produced.
Due to innovative production methods, precast concrete panels can be manufactured in a wide range of colours, finishes, facings, shapes and sizes. It can replicate the colour and finish of stone, masonry or terracotta and can incorporate architectural details such as cornices, quoins, arches and decorative relief panels.
Panels can be supported by fixing back to the structural frame of the building or can be self-supporting. They can also be designed themselves to parts of the building structure such as floors. Panels are typically in the range of 150 mm thick, designed to span either between columns or between floors.
Panels are manufactured by casting in purpose-built timber or fibre glass moulds. Steel reinforcement cages can be placed in the mould prior to pouring the concrete. Increasingly, prefabrication can incorporate the fixing of other elements such as insulation and windows. When the moulds are removed, the exposed surfaces can be treated in a number of ways, such as acid-etching, smooth or coarse grounding, grit or sand-blasting, rubbing or polishing, according to the surface finish specified.
 Related articles on Designing Buildings Wiki.
- Metal profile cladding.
- Offsite manufacturing.
- Plastic cladding.
- Precast concrete.
- Prestressed concrete.
- Reinforced concrete.
- Sandwich panel.
 External resources
Featured articles and news
Timber is a natural carbon sink, but it must not end up in landfill at the end of its useful life.
BSRIA has collaborated with the Department of Health on research into air permeability in isolation rooms.
New step-by-step route maps for implementing effective surface water management measures are published.
GMP is an agreement with a contractor that the contract sum will not exceed a specified maximum. Read more here.
The BREEAM Sustainability Champion is changing to the Advisory Professional - here's what you need to know.
A fresh round of job-cuts takes the total number of redundancies to over 1,000.
Read our introductory article to the completion date in construction contracts.
Almost 90% of freight in London is moved by road. The River Thames could add much needed extra capacity.
National Infrastructure Commission warn that large infrastructure projects are at risk of falling behind.
The quality of Cambridge owes as much to its open spaces as to its architectural uniqueness.