Paint is a liquid or mastic material that can be applied to surfaces to colour, protect and provide texture. They are usually stored as a liquid and dry into a thin film after application. Paints be categorised decorative, are applied on site, or industrial, applied in factories as part of the manufacturing process.
Some of the attributes normally required from a paint include:
- Capable of easy application.
- Good flow out of application marks (e.g. brush-marking).
- Capable of forming a continuous protective film.
- High opacity.
- Quick drying.
- Corrosion resistance.
- Water and heat resistance.
- Colour stability against visible and ultraviolet radiation.
- Abrasion and scratch resistance.
- Easily cleaned.
Paints can be applied with a brush or roller, or by dipping, flowcoating, spraying, hot spraying, electrostatic spraying, airless spraying, electrodeposition, powder coating, vacuum impregnation, immersion, and so on.
 The constituents of paint
Paints may be manufactured using pigments, binders, extenders, solvents and additives.
The pigments provide the paint with its colour and opacity. Pigments can be made of either organic or inorganic derivatives. The pigment powder is broken down into individual particles which are coated by and dispersed in a binder (resin), in a process known as 'wetting out'.
- Acrylic polymers.
- Alkyd polymers.
- Epoxy polymers.
An organic solvent is added to achieve the required consistency, improving the application of the paint to reduce its viscosity.
Extenders may also be added. These larger pigment particles provide improved adhesion and strengthen the film.
Depending on the intended use of the paint, other additives may be used to modify the properties of the liquid paint or dry film:
- Driers: For speeding up the drying time.
- Silicones: To improve the paint’s resistance to weather.
- Dispersants: To separate and stabilise pigment particles.
- Thixotropic agents: These provide paints with a thick consistency.
- Anti-settling agents: These are used to prevent the pigment from settling.
- Bactericides: These act as a preservative when the paint is in the can.
- Fungicides and algaecides: Protect paint films from mould, algae and lichen.
Oil-based paint, also described as ‘enamel’, is commonly used for exteriors, timber and metal due to its hardness and durability. It can create a glossy finish to surfaces. Oil-based enamel tends to dry between 8-24 hours depending on ventilation and humidity conditions.
Water-based paint, also described as ‘latex paint’ or ‘acrylic’ if the binding ingredient is a form of acrylic, takes less time to dry than oil-based, however, they are less glossy and are often less durable.
Although not strictly paint, primer is often required as a component when working with paint. Oil-based paint will require an oil-based primer, and water-based paint will require a water-based primer.
 Matte paint
The most common interior wall finish is ‘matte’, which is easy to apply using a brush or roller, and doesn’t provide a distracting shine or sheen to the finish. A solid colour is often achieved through applying more than one single coat. However, matte paint is easily marked and requires regular retouching.
 Eggshell and satin
An eggshell finish has a very subtle shine but without the same smoothness as a satin finish. As they are only partially reflective, they do not highlight imperfections making them suitable as interior wall paint. They are easy to apply and can often cover well with a single coat. They are frequently used in demanding environments such as kitchens and bathrooms, where they provide some water resistance, and can be cleanable.
Semi-gloss is more commonly used for trimmings such as baseboards, mouldings and doors rather than walls. It offers a hard finish, is easily cleanable, and is suitable for heavy use. The shine is less than full gloss, but a single coat is usually sufficient for a good covering.
This is commonly used on woodwork and metal as it provides a high shine. However, gloss paint tends to show imperfections and often requires several coats.
 Related articles on Designing Buildings Wiki
- Construction materials.
- Interior designer.
- Large-scale murals.
- Lead in construction.
- Paints and coatings.
- Room data sheet.
- Sustainable materials.
 External references
- Essential Chemical Industry - Paint
Featured articles and news
What will the General Data Protection Regulations (GDPR) mean for you when they come into force in May?
Business Secretary chairs a new taskforce to monitor and advise on mitigating the impacts of Carillion’s liquidation.
Sir John Armitt is appointed the new chair of the National Infrastructure Commission.
High quality and high density homes - is it what we need or is it storing up trouble?
Government announces its intention to strengthen planning rules to protect music venues and neighbours.
National Audit Office reports that there is little evidence that PFI offers better value than other forms of contracting.
What is liquidation and how does it apply to contractors in the construction industry?
Scrutiny is placed on Carillion's controversial 2013 decision to extend subcontractor payment terms to 120 days.
RSHP unveil their involvement in a boundary crossing which will provide a new entry point into Hong Kong.
With PFI currently under the spotlight due to Carillion, this introductory article explains what they are.
Estimates suggest that up to 30,000 small firms could be at risk of non-payment as a result of Carillion's collapse.