- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 11 Oct 2018
Mould growth in buildings
Mould (sometimes referred to as mildew) is a fungal growth. Whilst mould itself is not toxic, some moulds can produce toxins that can have negative effects on human health, for example causing asthma, rhinitis, itchy eyes, respiratory symptoms, respiratory infection and eczema.
Mould requires four factors for growth:
Mould spores are microscopic (ranging from 3 to 40 microns) and ubiquitous in the environment. Mould spores can be found floating in the air and in normal house dust. It is not generally practical therefore to eliminate mould spores and this is not a strategy for controlling mould growth.
Mould will feed on any substance that contains carbon atoms (such as organic substances). Many of the natural materials found in the built environment provide suitable food for mould, such as timber and paper. Removing sources of food for mould from an environment is generally impractical.
 Appropriate temperature
The majority of moulds grow well in a range of temperatures similar to those that humans require. This temperature range is wide, and even temperatures close to freezing will not prevent growth. In warmer environments, moulds will thrive. It is generally impractical therefore to control mould growth through temperature.
Most moulds require relatively high levels of moisture in order to grow. The majority require an equivalent of at least 70% relative humidity to thrive and most large mould outbreaks in buildings, occur where porous, cellulose-type materials contain persistent liquid water or condensation.
For more information, see Moisture.
- Natural or mechanical ventilation.
- Use of de-humidifiers or air conditioning units.
- Insulation of cold surfaces, such as pipes.
- Increasing air temperature.
- Removing sources of moisture such as drying clothes and ensuring vented tumble dryers are appropriately vented to the outside.
- Mending leaking pipes, wastes and overflows.
- Eliminating rising damp and penetrating damp.
 Related articles on Designing Buildings Wiki.
- Approved Document C.
- Cracking and building movement.
- Damp proofing.
- Defects in brickwork.
- Defects in stonework.
- Draught proofing.
- Dry rot fungus.
- Lime run-off.
- Penetrating damp.
- Recognising wood rot and insect damage in buildings.
- Rising damp.
- Rising damp in walls - diagnosis and treatment (DG 245).
- Thermal bridge.
 External references
Featured articles and news
Brokenshire launches an implementation plan for the recommendations made by Dame Judith Hackitt.
BSRIA publication provides guidance about the capture and analysis of big data.
Gove launches a waste and resources strategy for England.
Only 9% of construction workers are 24 or younger.
Blighting local areas, preventing investment and and encouraging anti-social behaviour.
Sharing knowledge about the conservation of the built and historic environment.
CIOB launches a call to improve quality in the built environment.
Vastint gets permission for a 6.6 hectare site to support the expansion of Leeds’ city core.
One of the Isle of Man’s best 1960s buildings.
Using renewable energy in developing countries - QSAND and Loughborough University Research collaboration.
From frost damage to sulphate attack, common causes of defects in brickwork.