Julian Opie Art Wall CitizenM Tower of London Hotel
When Julian Opie was commissioned to produce an art wall for the new designer hotel, citizenM Tower of London, he turned to stoneCIRCLE to manufacture the frieze. It was produced in Jordans Basebed Portland Stone and patinated bronze, in a similar technique to Rhona Smith's "An Age, An Instant" in New Burlington Mews. The Portland Stone was routed and the outline figures were cut from 5mm bronze sheet on the company's waterjet cutting machine and then patinated and glued into place on site.
The company also produced plastic templates for each figure. These were used to ensure the accuracy of the stone installation was maintained to allow the bronze figures to be fitted perfectly into the recess carved into the stone.
The two walls were 18m and 8m long by 2.4m high and consisted of 23 figures.
Featured articles and news
A document can be called a bond or a guarantee. Does the name matter and what is the difference between them?
New briefing note is launched focusing on increasing knowledge of housing that promotes health and wellbeing.
Arbitration is a private, contractual form of dispute resolution used in the construction industry.
The European Parliament has approved a revised Energy Performance of Buildings directive.
One in six MPs supports the ring-fencing of retentions as proposed in the 'Aldous Bill'.
A stakeholder is anyone who has an interest in the process or outcome of a construction project.
BRE launches online self-assessment tool for ethical labour sourcing.
Tower refurbishment failed to meet safety standards on several counts, according to leaked report.
It may seem obvious but what does the term 'structure' refer to within a built environment context?
Carillion's liabilities could be much higher than previously thought, according to Receiver.
Photographing Historic Buildings, by the former head of photography at English Heritage.