- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 18 Jan 2018
Guiding light: Unlocking London's residential density
People expect good natural lighting, both daylight and sunlight, in their homes. In cities, however, external obstructions restrict the amount of light that is available.
A BRE publication, ‘Site layout planning for daylight and sunlight: a guide to good practice’ (BRE Report BR209) gives guidance in this area. It explains how to limit the loss of light to existing buildings (especially housing) and how to achieve good levels of light in new developments.
A recent report ‘Guiding light: unlocking residential density’, written for lobby group London First, critiques the BRE Report and the way its guidance is applied in London.
Daylight surveyors GIA, the authors of the report, claim that local authorities use the BRE guidance ‘mechanistically’, preventing high density development. They point out that some historic London streets have higher levels of obstruction, and call for alternative targets in London, although they do not specify what these are.
The BRE Report itself recommends a flexible approach to applying the guidance. Its Introduction states that different target values can be used in historic city centres or areas with modern high rise buildings. An appendix to the guide explains how these can be applied. In BRE's experience, local authorities in London generally use the guidelines appropriately, allowing flexibility in tight urban environments.
GIA argue for density targets to be increased, and used as the basis for reduced daylight recommendations in areas of London. However, it is vital that new guidance recognises the human need for natural light, and doesn’t recommend conditions that may have an adverse impact on health.
Recent research has shown that daylight is more important than previously recognised. Scientists have discovered sensors in the eye, triggered by daylight, which regulate sleeping and waking and release hormones that help guard against cancer and other diseases. For this reason a new draft European standard on daylight recommends levels that are significantly higher than those in the BRE guidance.
There is an alternative approach, which involves careful daylighting design based around the principles set out in the BRE Report. High density is still possible, but the layout of new homes needs to be planned with care and appropriate window sizes specified. The historic examples cited by GIA often have larger windows on the lower floors which are more heavily obstructed. New developments also need to acknowledge their neighbours’ need for light, avoiding insensitive high rise blocks being built too close to nearby dwellings.
You can download a PDF of the London First report here.
 Related articles on Designing Buildings Wiki
- BRE Buzz articles on Designing Buildings Wiki.
- 7 ways better lighting can improve your health.
- Daylight factor.
- Health and wellbeing impacts of natural and artificial lighting.
- High quality high density homes.
- Light obstruction notice.
- Site layout planning for daylight and sunlight.
- Solar gain in buildings.
Featured articles and news
Create new habitats and improve air quality and wellbeing.
New report provides 12 key actions which could close the structural talent gap in the construction industry.
These can be used to find out whether a proposed development is likely to be approved. Read more here.
Studying a built environment degree? Check out our helpful student resources section.
New BRE research paper explores how blockchain technology can benefit the built environment industry.
Timber is a natural carbon sink, but it must not end up in landfill at the end of its useful life.
BSRIA has collaborated with the Department of Health on research into air permeability in isolation rooms.
New step-by-step route maps for implementing effective surface water management measures are published.
GMP is an agreement with a contractor that the contract sum will not exceed a specified maximum. Read more here.
The BREEAM Sustainability Champion is changing to the Advisory Professional - here's what you need to know.