- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 14 Feb 2017
Great crested newt and construction works
Great crested newts (Triturus cristatus) are the largest native newt species in Britain and are legally protected. They are widely distributed across lowland Great Britain, but absent from Ireland. Across Europe, numbers of great crested newts have declined, largely due to the loss of ponds and habitat deterioration. They spend a significant proportion of their time on land and return to waterbodies to breed in the spring.
The great crested newt is the largest of the three native species of newt and can grow up to 17cm in length. They are usually dark brown or black with a ‘warty’ or bumpy skin. Their underside is bright orange with black patches. The males develop a jagged crest along their backs in the spring with a white stripe. Females do not have a crest. Great crested newt larvae are mottled with black spots and have a long filament at the tip of their tail.
 Habitats and lifecycle
Great crested newts spend a large amount of time on land feeding, dispersing, resting and hibernating. From around late September to mid-October, when night temperatures drop, they enter hibernation until temperatures warm up again from early February.
- Rough grassland.
- Cracks or crevices in the ground.
- Bases of hedgerows.
- Mammal burrows.
From February until April/May, adults will move from their hibernation sites to their breeding ponds. Once they reach their ponds, they can breed between early March and the end of June (with seasonal variation). Females will lay large numbers of eggs within a waterbody, with each egg wrapped inside the leaves of pond plants.
Whilst great crested newts prefer to breed in small to medium sized ponds, they are also known to occur in other habitats including:
- Capture, kill, disturb or injure a great crested newt (either deliberately or by not taking enough care).
- Damage or destroy their resting or breeding place.
- Obstruct access to their resting or sheltering places.
- Possess, sell, control or transport live or dead newts, or parts of them.
- Take great crested newt eggs.
Any such offence could result in a prison sentence of up to 6 months and a £5,000 fine for each offence.
 Works that could affect great crested newts
- Maintenance works to ponds, woodland, scrub or rough grassland.
- Removing dense, scrub vegetation and ground disturbance.
- Removing materials, such as dead wood piles.
- Ground excavation works.
- Filling in or destroying ponds or other water bodies.
- There are historical records of newts within the land, or close to the land proposed for development.
- There is a waterbody within 500m of the application site boundary.
The first stage of a survey is likely to determine the habitat suitability index score. This will help assess how likely it is that great crested newts will use the site. If this score finds that newts may be present, a more detailed set of surveys will be required. It is only generally possible to undertake newt surveys in waterbodies between mid-March and early June and between four and six visits will be required during that time.
If great crested newts are found to be present and are considered likely to be affected by the proposals, it may be necessary to obtain a protected species licence from Natural England, Natural Resources Wales or Scottish Natural Heritage in advance of works taking place. As part of the licence, a mitigation strategy will be required which will detail how impacts on newts and their habitats will be avoided or minimised wherever possible.
 Alternative approach
In August 2015, Natural England launched a pilot project in Surrey to bring more flexibility to the licensing system. The project aims to take a more strategic approach, ensuring that resources are focused on newt populations and habitat that will bring the greatest benefits, and making the licensing process more straightforward.
A local conservation plan will be prepared that will identify areas where development will have the least impact and specify where new habitats will be created, so that when development results in habitat loss, the habitat gains will already be in place to compensate. Ref Woking Borough Council 24 August 2015.
Woking borough council has been looking at the impact on newts at the same time as planning permission, removing the need for expensive surveys prior to building works and individual licences to disturb newts if they are present.
The three-year programme aims to survey areas where newts are most prevalent and map the potential impacts on development. Their habitats will be enhanced or created prior to any development taking place – saving developers time and money.
Removing the EU protection, which covers all 28 member states with a single standard, is expected to help developers wishing to build on newt habitats, although certain protections would still exist in UK law. The government’s Housing White Paper, published in February 2017, highlighted the fact that the species can stall urgent house building projects and increase costs.
Meanwhile, Natural England has been piloting a new approach for dealing with the protection of the species. Initially trialled with Woking borough council in Surrey, the new scheme is set to be rolled out across the country.
Housing and planning minister Gavin Barwell said: “This new approach to managing great crested newts will not only ensure the continued protection of this rare species and its habitat, but will safeguard developers from the delays, costs and uncertainty which have so often restricted the job of building new homes.”
 Find out more
 Related articles on Designing Buildings Wiki.
- Biodiversity offsetting.
- Ecological Impact Assessment EcIA
- Ecological survey.
- Eco-Management and Audit Scheme.
- Environmental impact assessment.
- Environmental plan.
- Environmental policy.
- National nature reserves.
- Natural England.
- Preliminary ecological appraisal.
- Protected species
- Protected species licence.
 External references
Featured articles and news
The London Build Expo is hosting a Diversity in Construction panel and networking session on October 24.
Analysis can help develop a specification, but must not lead to inappropriate specifications being accepted.
Dos and don'ts for creating a smart home.
New ICE publication recommends pay-as-you-go tax to fund roads and other financing options.
BSRIA launches a White Paper on wearable technology and wellbeing in buildings.
Have the pressures of the market shredded the core values of professionalism?
Lead times are a measure of the amount of time that elapses between initiating and completing a construction process.
Government releases first tranche of funding for removal of unsafe high-rise cladding.
How to ensure UK transport infrastructure copes with severe winter weather.