- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 02 Feb 2018
Design drawings are used to develop and communicate ideas about a developing design:
- Develop and communicating the brief.
- Investigate potential sites and assess options.
- Develop the approved idea into a coherent and co-ordinated design.
- Communicate the developed design to other parties, such as the local planning authority, the building control body, contractors and suppliers.
- Record the completed construction.
- Record ongoing changes to the completed construction.
Some of these drawings are not traditionally considered to be ‘design’ drawings, as either the design proper has not begun, or the design has effectively already been completed. However, almost all of them will include some element of investigation into, or development of the design, or they would serve no purpose.
Very broadly, design drawings are categorised as:
- Feasibility studies.
- Options appraisals.
- Concept drawings. Some designers will differentiate between 'concept design' and 'scheme design'. In this case, the 'concept' is the initial design idea, whereas the 'scheme' develops the concept, taking on board more functional and practical considerations.
- Detailed design (or developed design).
- Technical design.
- Tender drawings.
- Shop drawings, installation drawings and construction drawings.
Design drawings will develop in detail from block and massing drawings and sketches to very detailed technical drawings describing every component in a way that will enable them to be constructed and operated.
When developing design drawings, it is important to consider what their purpose is, what information they are intended to convey and who they are intended to convey it to. This will determine their format, content, size, scale, and so on. For example, design drawings prepared for an inexperienced client may need to be very clear and to present only necessary information, at a scale and format that the client can easily view and share. Drawings for suppliers, on the other hand, may need to be very detailed and in a format that can be used for fabrication.
Design drawings may be prepared by a number of different practitioners, such as; architects, technicians and technologists, structural engineers, civil engineers, building services engineers, interior designers, landscape designers, contractors, subcontractors, suppliers, and so on. Some elements may first be designed by one individual or organisation and then taken on and developed by another.
It is important therefore that they are carefully integrated and co-ordinated to ensure that all elements are designed to an appropriate level of detail at the right time, and that designs prepared by different members of the project team create a single, unified set of information that can be constructed without clashes between components.
Typically, a lead designer will be appointed whose role includes integrating different aspects of the design and their interfaces into the overall design. Amongst other things, this may involve:
- Ensuring collaborative practices are adopted.
- Coordinating quality control systems.
- Adopting standard methods and procedures.
- Coordinating the preparation and issue of production information to contractors and suppliers.
- Reviewing designs prepared by contractors and suppliers.
The preparation of design drawings has be revolutionised by the emergence first of computer aided design (CAD) and then building information modelling (BIM). BIM allows the whole project team to collaborate on the development of a single integrated information model (although at level 2, this model is a ‘federated’ combination of separate models). However, the principle is the same as for traditional design in that the model will begin by communicating design intent, and will develop to become a virtual construction model.
In the early stages, it is likely to include massing diagrams or 2D symbols to represent generic elements of the design, with some critical elements developed in more detail. As the design progresses, the model will develop and the level of detail will increase, including, first, objects based on generic representations, and then specific objects with specifications and method statements attached along with information about space allocation for operation, access, maintenance, installation, replacement, and so on. Ultimately, it will contain all the information necessary to allow the objects in the model to be manufactured, installed or constructed and then operated.
 Related articles on Designing Buildings Wiki
- As-built drawings and record drawings.
- Assembly drawing.
- Building information modelling.
- Construction drawing.
- Detail drawing.
- Component drawing.
- Concept drawing.
- Design intent.
- General arrangement drawing.
- Information manager.
- Installation drawings.
- Lead designer.
- North American Paper Sizes.
- Notation and units on drawings and documents.
- Orthogonal plan.
- Paper sizes.
- PAS 1192-2.
- Production information.
- Scale drawing.
- Section drawing.
- Shop drawings.
- Space planning.
- Symbols on architectural drawings.
- Technical drawing.
- Technical drawing pen sizes.
- Working drawings.
Featured articles and news
It's nearly two years since level 2 BIM was made a minimum requirement on certain public projects. But what actually is it?
Renowned water expert Prof. Martin van Veelen challenges political leaders to do more on safe and clean water supplies.
Inquiry criticises PwC for "milking the Carillion cow dry".
A recent roundtable discussed the future of transport in the UK – including the role of connected and autonomous vehicles.
Architects report cancelled projects and uncertainty concerns in a new RIBA survey on Brexit.
Quality helps eliminate defects, but it can also drive improvement and increase profit.
PII provides insurance cover against negligence claims and is widely used where services are being provided.
Rogers Stirk Harbour + Partners release first images of their planned new addition to the Toronto skyline.
Land which is, or was, occupied by a permanent structure; brownfield sites can have significant development potential.
The 3-day IHBC 2018 School will focus on; Our Shared heritage: Communication - Negotiation – Transformation.
An innovative 'green bench' is installed in London that absorbs as much pollution as 275 trees.