- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 13 Mar 2018
A conservatory is a structure typically attached to a building such as a house consisting of low level brick walls with framed glazing above. In the UK, a space is considered to be a conservatory if it has glazing for at least 50% of its side wall area and at least 75% of its roof.
Traditionally, European cities built conservatories in the 19th century for horticultural purposes and for entertaining, although as far back as the 16th century wealthy landowners had built similar structures to cultivate citrus fruits. With the onset of the Second World War, there was a halt in the construction of conservatories in Britain, and they were only revived again in the 1970s. Today, conservatories are a popular way of maximizing the size of existing properties as the cost of moving to a new property has increased.
 Types of conservatory
This type of conservatory gets its name from the fact that it appears to lean against the house. Lean-to conservatories are typically a simple rectangular or square shape with a gently sloping roof that is generally lower than other conservatory types. They can be particularly suitable for houses with limited garden space and bungalows.
It is usual for a lean-to to have dwarf walls, typically around 60 cm high, with glazing on all three sides as well as a glazed roof. A more affordable alternative is to use raised uPVC panels at the foot of the conservatory and polycarbonate for the roof. This is the most straight-forward and cheapest option for a conservatory.
This is a period-design conservatory that is characterised by its rounded bay front and apex roof with a ridge along the top. The bay front can have a number of different facets – 3, 5 or 7 – depending upon preference. It is common for a Victorian conservatory to consist of a dwarf wall upon which the frames for the glazing sit. However, it is possible for floor-to-ceiling glazing to be used instead.
This is generally a more expensive option due to its slightly larger footprint as a result of the faceted front.
This is similar to a Victorian style but instead of the faceted front, it has a square, or rectangular shape and a pitched roof. The roof can take one of two common forms, either a gable end design where the end wall is flat, or a double-hipped design in which each side is a sloping roof including the end that slopes into the house.
A P-shaped conservatory is so called because one end is smaller than the other, with the larger end given a rounded effect with facets. This can often combine features of both Victorian and Edwardian designs, with the main advantage being that it offers more space which can, if required, be separated for different uses.
- A conservatory cannot be built forward of the principal or side elevation or where it would be fronting a highway.
- A side conservatory cannot have a greater width than half the width of the original house (the house as it was first built or as it stood on 1 July 1948).
- Side and rear conservatories must be single-storey with a maximum height of 4 m.
- A single-storey rear conservatory must not extend beyond the rear wall of the original house by more than 3 m (if an attached house), or 4 m (if detached).
- Side and rear conservatories must have a maximum eaves height of 3 m if it is within 2 m of a boundary.
- The maximum eaves height should be no higher than the eaves of the existing house.
While building regulations generally tend to apply for house extensions, and any new structural opening between the existing house and the conservatory, the conservatory itself is often deemed to be exempt. This is provided that they are:
- Built at ground level.
- Have a floor area of less than 30 sq. m.
- Are separated from the house by walls, doors or windows.
- Are fitted with an independent heating system.
- Are fitted with glazing and electrical installations that comply with the applicable building regulations.
Where it is intended to integrate the space into the rest of the building it may be necessary for it to be better insulated, with less glazing.
 Related articles on Designing Buildings Wiki
- Building an extension.
- Dwarf wall.
- How to build a garage.
- How to build a porch.
- How to lay bricks.
- Licence to alter.
- Listed buildings.
- Party Wall Act.
- Planning permission.
 External references
Featured articles and news
The complex situation where events occur at the same time.
How can Latin America and the Caribbean unlock the digital potential of their new and existing built environment?
CIOB publish a new code of estimating practice.
These relate to a programme where each activity is allocated a price and interim payments made against completion.
Police testing finds that flat door could only withstand fire for half its designed time.
Have a look at these images from a new photography book of buildings being reclaimed by nature.
What does the phrase 'demised premises' mean? Find out here in our introductory article.
New good practice guidance looks at the best way to deliver multi-functional solar car parks.
Philip Hammond suggests the public finances have reached a turning point.
The fifth annual ICE-Topcon lecture looked at how to balance smart technology and security.
Support grows for the Construction (Retention Deposit Schemes) Bill.