- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 10 Nov 2018
Concrete is the most commonly used man-made material on earth. It is an important construction material used extensively in buildings, bridges, roads and dams. Its uses range from structural applications, to paviours, kerbs, pipes and drains.
Concrete is a composite material, consisting mainly of Portland cement, water and aggregate (gravel, sand or rock). When these materials are mixed together, they form a workable paste which then gradually hardens over time.
For the different types, see Types of concrete.
A material similar to concrete was first developed by the Egyptians, consisting of lime and gypsum. Typically, lime, chalk or oyster shells continued being used as the cement forming agent until the early-1800s.
 Benefits of concrete
There are numerous positive aspects of concrete:
- It is a relatively cheap material and has a relatively long life with few maintenance requirements.
- It is strong in compression.
- Before it hardens it is a very pliable substance that can easily be shaped.
- It is non-combustible.
 Limitations of concrete
The limitations of concrete include:
- Relatively low tensile strength when compared to other building materials.
- Low ductability.
- Low strength-to-weight ratio.
- It is susceptible to cracking.
 Characteristics of concrete
The characteristics of concrete are determined by the aggregate or cement used, or by the method that is used to produce it. The water-to-cement ratio is the determining factor in ordinary structural concrete with a lower water content resulting in a stronger concrete.
This, however, reduces the workability (and pumpability) of the concrete, which can be measured using the slump test. The grading, shape, texture and proportion of aggregate can also have a similar affect. If a particularly strong concrete is required, the amount of aggregate can be reduced in relation to the cement. However, cement is a significant cost factor, and increasing its proportion in the mix will increase the overall price.
For more information, see The properties of concrete.
 Concrete strength
Concrete strength is determined by the force required to crush it and is measured in pounds per square inch or kilograms per square centimetre. Strength can be affected by many variables including moisture and temperature.
The tensile strength of concrete can be improved with the addition of metal rods, wires, cables or mesh. Where very high tensile stresses are expected (such as in wide unsupported spans in roofs or bridges) concrete can include pretensioned steel wires. This creates compressive forces in the concrete that help offset the tensile forces that the structure is subject to.
For more information, see Testing concrete.
Formwork is a temporary mould into which concrete is poured and formed. Traditional formwork is fabricated using timber, but it can also be constructed from steel, glass fibre reinforced plastics and other materials.
Formwork may be; temporary, re-usable, or stay-in-place. There are also a number of proprietary systems such as those used to support vertical formwork while concrete cures, consisting of a series of tubes and ties.
See Formwork for more information.
Concrete has a relatively high embodied energy, resulting from its extraction, manufacture and transportation. Waste materials can be included within the concrete mix such as Recycled Crushed Aggregate (RCA), Ground Granulated Blast-Furnace Slag (GGBS) and Pulverised Fuel Ash (PFA).
 Find out more
 Related articles on Designing Buildings Wiki.
- 3D concrete printer.
- Admixture, additive or agent.
- Admixtures in concrete.
- Alkali-activated binder.
- Alkali-aggregate reaction (AAR).
- Alkali-silica reaction (ASR).
- Architectural concrete.
- Cast-in-place concrete.
- Cellular concrete.
- Concrete in aggressive ground (SD 1).
- Concrete-steel composite structures.
- Concrete repair mortars.
- Concrete superplasticizer.
- Concrete vs. steel.
- Concreting plant.
- How to clean concrete.
- Portland cement.
- Precast concrete.
- Prestressed concrete.
- Power float.
- Reinforced concrete.
- Self-compacting concrete.
- Slip form.
- Smart concrete.
- Stratification of concrete.
- Testing concrete.
- The properties of concrete.
- The use of concrete structures to protect construction sites.
- Types of concrete.
- What does in situ mean?
Featured articles and news
Brokenshire launches an implementation plan for the recommendations made by Dame Judith Hackitt.
BSRIA publication provides guidance about the capture and analysis of big data.
Gove launches a waste and resources strategy for England.
Only 9% of construction workers are 24 or younger.
Blighting local areas, preventing investment and and encouraging anti-social behaviour.
Sharing knowledge about the conservation of the built and historic environment.
CIOB launches a call to improve quality in the built environment.
Vastint gets permission for a 6.6 hectare site to support the expansion of Leeds’ city core.
One of the Isle of Man’s best 1960s buildings.
Using renewable energy in developing countries - QSAND and Loughborough University Research collaboration.
From frost damage to sulphate attack, common causes of defects in brickwork.