Designing strength into buildings to prevent collapse has been the underlying tenet of structural engineering since before the ancient Egyptians built the first pyramids. A second fundamental principle, which appears in all modern design codes, is to build structures that are stiff enough to prevent excessive movement and deformation under statistically-calculated worst-case loads, such as high winds, heavy snow, large crowds, and so on. This is not really a question of safety, rather it is about the usability of structures and the comfort of the user, termed ‘serviceability’ requirements.
Adaptive structures are designed by separating the two engineering principles using conventional structural materials for safety (a passive system) and another (active) system to control movements, thereby maintaining comfort and usability.
Ed McCann, director of Expedition Engineering, and Gennaro Senatore of University College London, began by explaining their recent collaboration on adaptive structures, which unlike conventional structures, can successfully change their shape to prevent excessive movement under load. They claimed that super-slender structures could now be created that use much less material, less whole-life energy and achieve very high levels of performance. But the question remains as to whether this is practical in the real world?
Senatore explained how he developed a high performance structure that was capable of counteracting loads actively by means of actuators, sensors and control intelligence. Using these methods, a full-scale prototype was developed, in the form of a very slender space truss with embedded sensors and actuators, which performed successfully as predicted.
He explained that the control system architecture was designed with the primary aim of identifying the response to loading in terms of internal forces and displacements for the structure. This allows the prototype to control itself without user intervention or predetermined knowledge of the external load.
This degree of slenderness is not possible with conventional structural solutions (a ratio of 12:1 might be expected for conventional trusses, and 20:1 for conventional steel beams). This could allow for slender structures to be built in limited space, whether due to refurbishment, architectural desire, constraints on height, or limited footprints for tall buildings.
The structure consists of 45 passive steel members and 10 electric linear actuators strategically positioned within diagonal members which are under tension. The structure is designed to support its own (dead load) weight (102kg including actuators and cladding), plus a live load of 100kg at the tip of the cantilever.
The frame is fully instrumented to monitor stress in the passive members, the deflected shape, and the operational energy consumed by the active elements. The passive steel members in the truss have been sized to prevent collapse, but instead of adding more material, a state-of-the-art control system governs the more onerous requirements of deflection and movement. Due to the fail-safe nature of the actuators, if the power is cut, the actuators simply stop moving with no compromise of load carrying capacity.
In order to validate the performance of the prototype, load tests were carried out by placing weights ranging from 10kg to 100kg at the cantilever tip. The operational energy use was measured by monitoring the power being consumed by the actuators and the control hardware during load/displacement control.
The total energy (embodied + operational) of the prototype was then benchmarked against that of two equivalent passive structures. The first structure was made of two steel I-beams; the second was a truss designed using state-of-the-art optimisation methods. The adaptive truss achieved 70% total ‘whole-life’ energy savings compared to the I-beams, and 40% compared to the passive truss.
These experimental results confirmed that the adaptive structures design method, and adaptive structures in general, could save substantial material mass and total energy compared to equivalent passive structures.
 Related articles on Designing Buildings Wiki
- Biaxial bending.
- Braced frame.
- Bridge construction.
- Concept structural design of buildings.
- Concrete-steel composite structures.
- Elements of structure in buildings.
- Limit state design.
- Long span roof.
- Major cast metal components.
- Mesh mould metal.
- Structural engineer.
- Structural modeling and analysis.
- Structural steelwork.
- The design of temporary structures and wind adjacent to tall buildings.
- Types of structural load.
Featured articles and news
Urban Heritage, Development and Sustainability: international frameworks, national and local guidance.
What will the General Data Protection Regulations (GDPR) mean for you when they come into force in May?
Business Secretary chairs a new taskforce to monitor and advise on mitigating the impacts of Carillion’s liquidation.
Sir John Armitt is appointed the new chair of the National Infrastructure Commission.
High quality and high density homes - is it what we need or is it storing up trouble?
Government announces its intention to strengthen planning rules to protect music venues and neighbours.
National Audit Office reports that there is little evidence that PFI offers better value than other forms of contracting.
What is liquidation and how does it apply to contractors in the construction industry?
Scrutiny is placed on Carillion's controversial 2013 decision to extend subcontractor payment terms to 120 days.
RSHP unveil their involvement in a boundary crossing which will provide a new entry point into Hong Kong.
With PFI currently under the spotlight due to Carillion, this introductory article explains what they are.
Estimates suggest that up to 30,000 small firms could be at risk of non-payment as a result of Carillion's collapse.