Redefining density, making the best use of London’s land to build more and better homes
On 16 September 2015, London First and Savills published Redefining Density, Making the best use of London’s land to build more and better homes.
It points out that London is not particularly densely developed compared to other major cities such as Paris and Madrid. Even one of London’s densest boroughs, Islington, with an average of 138 people per hectare, has a low density compared to Madrid’s Centro district, with an average of 286 people per hectare.
If low-density areas with good transport links had a moderately increased housing density, this could create approximately 1.4 million new homes across London. This is one million more than the 10-year London Plan housebuilding target, and if even just a tenth of these one million homes were built in the next 10 years, London could increase its housebuilding target to 52,000 new homes a year, close to the actual need for new homes. The Greater London Authority suggests that London needs between 49,000 and 62,000 new homes every year. Savills estimates that an average of just 32,000 homes a year will be built under current plans over the next five years.
The report argues that higher density does not necessarily mean high-rise, and that tower blocks surrounded by empty space can have a lower density than Victorian terraced housing. It suggests that design quality is an important factor in persuading people that intensification of land use can work, and that higher density can create the critical mass required to support more shops, better local services, and improved social and transport infrastructure.
Jo Valentine, Chief Executive of London First said, “London is in the midst of a housing crisis and the business community believes housing costs are a major threat to the capital’s international competitiveness. We need London’s planning policies to give strategic support to building at a higher density, while being clear that the density of any particular development must be appropriate for its location.
Susan Emmett, Director, Residential Research, at Savills, said, “The opportunities to ensure that London is getting the most out of the development process are considerable, especially in the outer boroughs. Done properly, a higher density environment which combines a greater number of homes with shops, services and leisure space can bring many benefits to residents.”
 Related articles on Designing Buildings Wiki
Featured articles and news
The origins, evolution and future of Level 3 BIM.
For new and returning Urban Design students, check out our article list divided up into the modules you'll be studying.
Report states that health of urban dwellers could be significantly improved by rethinking transport design.
The Kremlin, the centre of Russian power, includes some of the country's finest architecture.
Report launched outlining steps for a national infrastructure system that is efficient, sustainable, and delivers until 2050.
A review of Justin Bere's concise and well-presented introductory guide to Passive House.
This article describes in detail the tender process for a typical commercial construction contract.
What is energy storage, what are the different types and what is its future?
MAD Architects reveal their designs for a state-of-the-art concert hall in Beijing.
Take a look at BIG's designs for two twisting towers in New York City.
'The filing cabinet' which was labelled one of the best British buildings of the 21st century.